- July 10, 2026
- By tr_admin
- Fascia Repair and Replacement
The fascia board runs along the lower edge of your roofline and carries the full weight of your gutter system. When it deteriorates, gutters lose their anchor point and water can enter your roof cavity. Most homeowners notice fascia damage through sagging gutters, peeling paint along the roofline, or dark staining on the board itself.
What are fascia boards made of?
In Australian homes built before 2000, fascia boards are most commonly timber, typically pine or hardwood. Newer builds use Colorbond steel fascia, which does not rot and resists termite damage. Fibre cement fascia is used in coastal areas where salt air accelerates timber deterioration.
What does fascia replacement cost in Australia?
Fascia Installation and replacement costs $45 to $85 per linear metre for materials plus labour. A single-storey Melbourne home with 30 to 40 linear metres of fascia costs $1,400 to $3,400 for full replacement, including gutter removal and reinstallation.
Colorbond steel fascia costs $80 to $130 per linear metre supplied and installed, but lasts significantly longer and requires no painting.
Factors that affect the price:
Roof height: Two-storey homes require scaffolding or elevated work platforms, adding $400 to $1,200 to the total cost.
Extent of rot: If rot has spread to rafter ends behind the fascia, the repair scope increases beyond a straight board replacement.
Gutter reinstallation: Replacing fascia requires removing and refitting the gutter system. This is included in most roof plumber quotes, but confirm it before work begins.
Who does the work?
Fascia replacement connected to gutter work is carried out by a licensed roof plumber. Structural fascia work with no gutter involvement may fall to a licensed builder or carpenter. In most cases, homeowners call a roof plumber because both jobs happen at the same time.
Bennett’s Gutters handles fascia installation and gutter replacement across South East Melbourne and the Mornington Peninsula. The team assesses fascia condition before removing gutters to identify hidden rot early. Call 0402 473 771 for a free quote.
Timber vs steel: which to choose?
Timber is easier to repair in sections but requires repainting every 5 to 7 years. Colorbond steel requires no painting, is available in all standard roof colours, and is covered by BlueScope Steel’s 10-year coating warranty when installed correctly. For homeowners who want to complete the job once, steel is the lower-maintenance choice.
Disclaimer: The prices in this guide are approximate averages for educational purposes only. Actual costs may differ based on your property’s condition, project requirements, and the results of an on-site inspection.
Frequently Asked Questions
Can I paint over a rotting fascia board instead of replacing it?
Painting over rotten timber hides the problem without stopping it. Replace any section where the timber is soft, crumbling, or shows visible fungal growth.
How long do timber fascia boards last in Melbourne?
With regular maintenance, 15 to 25 years. Without repainting, rot can set in within 10 years in higher-rainfall areas.
Do I need a building permit to replace fascia?
In Victoria, like-for-like fascia replacement does not generally require a building permit under the Building Regulations 2018. Structural changes require a check with your local council.
Will my gutters need replacing at the same time?
Not always. If the gutters are in good condition, a roof plumber can remove them, replace the fascia, and refit the same gutters. Replacing both at once saves on labour if the gutters are nearing end of life.